Oracles on Non-EVM L1s: Which One Should You Trust?

5 min read

a glowing eye-shaped oracle node feeding data streams into several differently-shaped blockchain networks

Key Takeaways

  • Evaluating oracles non evm options matters because most oracle infrastructure was built EVM-first, and non-EVM chains often get narrower feed coverage or later feature rollouts.
  • Chainlink remains the largest oracle network by value secured, but its non-EVM coverage — Solana, Aptos — arrived years after its EVM dominance was established.
  • Pyth pioneered the pull-oracle model and built its earliest and deepest integration on Solana specifically, making it the default choice for many non-EVM-first protocols.
  • RedStone has emerged as the fastest-growing oracle for non-EVM breadth, supporting over 110 chains including Solana, Sui, TON, and Aptos through a modular push/pull architecture.
  • Oracle mispricing incidents have caused real, quantifiable losses across the industry, making the choice of oracle provider a direct risk-management decision, not just a technical integration detail.

If you’re building on a non-EVM chain, the oracle question isn’t just “which provider is biggest” — it’s which provider actually built real infrastructure for your specific chain, rather than bolting on non-EVM support as an afterthought to an EVM-first product.

Why Non-EVM Oracle Support Is a Different Problem

Most oracle networks were architected around Ethereum’s account model and EVM execution environment first, which means their non-EVM integrations often involve real engineering adaptation rather than a simple redeploy. Solana’s parallelized runtime, Sui and Aptos’s Move-based object model, and Chia’s UTXO-style coin set model each require an oracle to solve data delivery and verification differently than it would on an EVM chain. This is precisely the same category of infrastructure decision covered in indexing infrastructure — general-purpose tools built for the dominant chain family don’t always translate cleanly to everything else.

Quick Decision Table

If you need…Best fit
The most battle-tested option with the deepest track recordChainlink
Sub-second pricing for high-frequency trading on Solana-family chainsPyth
Broadest non-EVM chain coverage in a single modular productRedStone

Push vs. Pull: The Fundamental Architecture Split

Oracle networks broadly fall into two delivery models, and understanding the difference matters more on non-EVM chains where gas economics and block times can differ significantly from Ethereum. Push oracles proactively publish price updates on-chain at regular intervals or when prices move beyond a set threshold, meaning data is always available but every update costs gas whether or not anyone reads it. Pull oracles instead let an application request fresh data on demand, paying only when data is actually needed — a model that pairs especially well with Solana’s low-fee, high-throughput environment, which is part of why Pyth built its earliest infrastructure there.

Why This Split Matters More on Non-EVM Chains

On a chain with meaningfully different fee economics than Ethereum, the push-versus-pull choice can noticeably affect both cost and data freshness. A high-frequency trading application on a fast, cheap chain benefits from pull-model sub-second updates, while a lending protocol checking collateral ratios only occasionally may be perfectly served by periodic push updates. Evaluating which model an oracle provider defaults to on your specific chain — not just in general — is a meaningful part of the decision.

Chainlink: The Incumbent, Arriving Later on Non-EVM

Chainlink secures more than $33 billion in total on-chain value across over 500 protocols, making it the dominant oracle provider by a wide margin. Its non-EVM expansion has been real but gradual — Chainlink’s CCIP messaging protocol reached Solana mainnet only in May 2025, making Solana the first non-EVM chain integrated into CCIP, years after Chainlink’s EVM dominance was already established. For teams that specifically need Chainlink’s institutional credibility and existing integrations with major DeFi protocols, this coverage is real, but it’s worth confirming your specific non-EVM chain and desired feed actually have mature Chainlink support rather than assuming parity with Ethereum coverage.

Pyth: Built Non-EVM-First

Pyth took the opposite path from Chainlink, launching its pull-oracle model on Solana before expanding to other chains via the Wormhole bridge. This gives Pyth a genuine claim to non-EVM-native design rather than retrofitted support, and it remains the most deeply integrated oracle across Solana DeFi specifically. Pyth’s model relies on data publishers — market makers and trading firms who submit price data directly — rather than the aggregator model Chainlink uses, a structural difference that shapes both its data sourcing and its incentive design.

Where Pyth’s Model Shows Its Trade-offs

Because Pyth optimizes heavily for publisher count and coverage breadth rather than the aggregator-based conservatism Chainlink favors, it has experienced its own mispricing incidents — including wrongful liquidations tied to feed issues on Solana-based protocols. This doesn’t disqualify Pyth as an option, but it underscores that no oracle model is immune to failure, and protocols relying on any single oracle for critical operations like liquidations should weigh redundancy seriously.

RedStone: The Non-EVM Coverage Specialist

RedStone has emerged as the fastest-growing oracle network specifically on non-EVM breadth, supporting more than 110 chains in its pull model, including Solana, Sui, TON, Aptos, Stellar, and Canton — a chain list that reads distinctly non-EVM-focused compared to Chainlink’s Ethereum-centric core. RedStone’s modular push/pull architecture lets it serve both established EVM protocols and newer non-EVM ecosystems from the same underlying infrastructure, and the network reports zero major mispricing incidents to date, a notable claim in a category where incidents have been common industry-wide.

The Trade-off With a Newer, Smaller Network

RedStone’s team size and operating history are both smaller than Chainlink’s, meaning less institutional recognition and a shorter track record under extreme market stress. For protocols where compliance or audit requirements specifically expect Chainlink by name, RedStone may not satisfy that requirement regardless of its technical merits — a consideration separate from raw chain coverage.

Oracle Comparison for Non-EVM Chains

FactorChainlinkPythRedStone
ModelPrimarily pushPullPush and pull (modular)
Non-EVM chainsAptos, Solana (since 2025)Solana, Sui, TON, Aptos, and more110+ chains including Solana, Sui, TON, Stellar, Canton
Data sourceAggregatorsPublishers (market makers)On-chain, off-chain, and bespoke sources
Track recordLongest, largest value securedDeep Solana-native historyNewer, fastest-growing on non-EVM breadth

“Chainlink has the longest track record, whereas Pyth observed accelerated growth. RedStone emerged as the fastest-growing oracle for non-EVM chains.” — from a 2026 comparative analysis of blockchain oracle networks

Data Publisher Networks: A Structural Difference Worth Understanding

Beyond the push-versus-pull architecture, oracle networks also differ meaningfully in how they source the data they deliver, and this matters especially on non-EVM chains where a specific oracle’s publisher base may be shallower than its EVM coverage. Chainlink relies on decentralized aggregation across independent node operators pulling from multiple data sources, taking a median response to resist manipulation of any single feed. Pyth instead sources data directly from named publishers — typically market makers and trading firms — who submit price data they’re already generating as part of their own trading operations, an approach that can produce faster, more granular pricing but ties data quality more directly to publisher participation on a given chain.

Why Publisher Depth Varies by Chain

A protocol evaluating oracle options for a newer or smaller non-EVM chain should specifically check how many active publishers or node operators are actually contributing data on that chain, not just whether the oracle network technically supports it. A chain with only a handful of active publishers for a given oracle carries meaningfully more concentration risk than one with dozens, even if both technically list that chain as “supported” in the oracle’s marketing materials.

Case Study: Choosing an Oracle for a Non-EVM Lending Protocol

A lending protocol launching on a non-EVM chain evaluated all three providers before choosing a dual-oracle setup: Pyth as the primary feed for its deep native integration and sub-second updates, with a RedStone feed configured as a fallback in case of Pyth downtime or feed staleness. This redundancy pattern — rather than relying on a single oracle for liquidation-critical price data — reflects a broader lesson from the industry’s mispricing incident history: even well-regarded oracles have failed at critical moments, and redundancy costs little relative to the downside of a single point of failure in collateral pricing.

Oracles Non-EVM FAQs

What are oracles on non-EVM L1s?

Oracles non evm refers to decentralized data feed networks — like Chainlink, Pyth, and RedStone — that deliver off-chain price and data feeds to non-Ethereum-Virtual-Machine blockchains such as Solana, Sui, Aptos, and Chia.

Which oracle has the best non-EVM chain coverage?

RedStone currently offers the broadest non-EVM chain coverage at over 110 chains, though Pyth has the deepest native integration specifically on Solana, and Chainlink offers the longest overall track record.

Is Pyth better than Chainlink for non-EVM chains?

Pyth was built non-EVM-first and has the deepest Solana-native integration, while Chainlink’s non-EVM support arrived later but comes with a longer overall track record and broader institutional recognition — the better choice depends on your specific chain and risk tolerance.

Can oracle mispricing cause real losses?

Yes — mispricing events across major oracle networks have caused documented losses including wrongful liquidations and depeg-related losses on various protocols, which is why redundant oracle setups are common practice for liquidation-critical applications.

Should I use one oracle or multiple oracles?

For any protocol where a bad price feed could trigger wrongful liquidations or exploitable mispricing, using a primary oracle with a secondary fallback is a common risk-management pattern rather than relying on any single oracles non evm provider alone.

Oracles Non-EVM Citations